| 詳細參數 | |||
|---|---|---|---|
| 品牌 | foxboro | 型號 | P0916PWOC |
| 結構形式 | 模塊式 | 安裝方式 | 控制室安裝 |
| LD指令處理器 | 硬PLC | 功能 | 模塊 |
| 工作電壓 | 12.5-42VDC | 產品認證 | CE |
| 環境溫度 | 0至,60°C | 環境濕度 | 5至95%,非冷凝 |
| 加工定制 | 否 | 產地 | 美國 |
FOXBORO P0916PWOC
P0916PWOC基于轉差頻率的矢量控制方式與轉差頻率控制方式兩者的定常特性一致，但是基于轉差頻率的矢量控制還要經過坐標變換對電動機定子電流的相位進行控制，使之滿足一定的條件，以消除轉矩電流過渡過程中的波動。因此，基于轉差頻率的矢量控制方式比轉差頻率控制方式在輸出特性方面能得到很大的改善。但是，這種控制方式屬于閉環控制方式，需要在電動機上安裝速度傳感器，因此，應用范圍受到限制。
無速度傳感器矢量控制是通過坐標變換處理分別對勵磁電流和轉矩電流進行控制，然后通過控制電動機定子繞組上的電壓、電流辨識轉速以達到控制勵磁電流和轉矩電流的目的。這種控制方式調速范圍寬，P0916PWOC啟動轉矩大，工作可靠，操作方便，但計算比較復雜，一般需要專門的處理器來進行計算，因此，實時性不是太理想，控制精度受到計算精度的影響。
P0916pwoc vector control based on slip frequency has the same steady characteristics as slip frequency control, but the vector control based on slip frequency also controls the phase of motor stator current through coordinate transbation to meet certain conditions, so as to eliminate the fluctuation in the process of torque current transition. Therefore, the vector control b based on slip frequency can greatly improve the output characteristics than the slip frequency control b. However, this control mode belongs to the closed-loop control mode, and the speed sensor needs to be installed on the motor. Therefore, the application range is limited.
speed sensorless vector control controls the excitation current and torque current respectively through coordinate transbation, and then identifies the speed by controlling the voltage and current on the motor stator winding, so as to control the excitation current and torque current. This control mode has wide speed regulation range, large p0916pwoc starting torque, reliable operation and convenient operation, but the calculation is relatively complex, which generally requires a special processor for calculation. Therefore, the real-time perbance is not ideal, and the control accuracy is affected by the calculation accuracy.
如果您發現其他供貨商為相同產品提供更為低廉的價格，
我們也愿意參照其價格向您提供進一步的折扣。只要您誠心購買，
如果還有其他任何問題，請隨時與我們聯系。
我們的使命是幫助你：降低維護成本!
我們有大量庫存的控制系統部件。 我們還有許多新的硬件和停產備件，以幫助支持你現有的控制系統。
您或許會在我們的資料中找到您需要的備品備件，在任何時間，我們都?xì)g迎您對我們產品提出寶貴的建議。
