| 詳細參數 | |||
|---|---|---|---|
| 品牌 | 其他 | 型號 | SP |
| 葉輪數目 | 單級 | 加工定制 | 是 |
| 材質 | 鑄鐵 | 顏色 | |
| 產地 | 河北 | ||
水下抽沙泵@棗莊水下抽沙泵@水下抽沙泵吸不上水
水下抽沙泵@棗莊水下抽沙泵@水下抽沙泵吸不上水
性能參數的選擇泵型確定后，揚程和流量是選擇泵規格大小和是否串聯的依據。輸送高濃度強磨蝕性渣漿，一般不選用泵轉數nmax(性能曲線中多種轉數的轉數)，選擇轉數為3/4nmax左右比較合適。當選定的泵在3/4 nmax時，流量合適而揚程達不到，可采用多臺泵串聯形式。對于沃曼泵，不同的漿體，流量范圍也要有所限制；對于高濃度強磨蝕的渣漿。2流量應選泵效率對應流量的40—80%范圍內；對于濃度低磨蝕渣漿，流量應選在泵效率對應流量的40%—100%范圍內。一般不選擇在效率對應流量的100%—120%范圍內。
一、產品概述SP液下渣漿泵為立式離心液下渣漿泵，浸入液下，用于輸送磨蝕性、粗顆粒、高濃度渣漿。不需要任何軸封和軸封水，在吸入量不足的工況下也能正常工作。
SP型液下渣漿泵過流部件由耐磨金屬制成。
根據渣漿池液面的高低，可選擇不同長度的泵傳動軸或吸入管。
采用多種速度和多種變型方式，使得泵在工況下運行，使用壽命長，運行效益高，能滿足多類惡劣的輸送條件。
Second, SP liquid slurry pump application Range
Slurry pump is mainly suitable for conveying corrosive, coarse particles, high concentration slag slurry. Widely used in bllurgy, mining, coal, electricity, building materials, environmental protection and other departments.
Third, SP liquid slag slurry pump structure debion
The difference between the slurry pump structure of SPR liquid and the slurry pump under SP liquid is only that the parts of the dipping slag slurry are lined with corrosion-resistant rubber, the parts lined with rubber include shafts, pumps, impellers, protective plates and filters, and the connecting bolts in the lower part of the immersion liquid are equipped with rubber protective sleeves, and the transmission parts and SP pumps
水下抽沙泵@棗莊水下抽沙泵@水下抽沙泵吸不上水
水下抽沙泵@棗莊水下抽沙泵@水下抽沙泵吸不上水
性能參數，過流部件材質，密封型式和傳動方式等幾個主要方面。1， 泵型的選擇離心式渣漿泵的類型很多，應根據漿體的性質不同選擇不同類型的泵，以沃曼泵為例，重量濃度30%以下的低磨蝕渣漿可選用L型泵；高濃度強磨蝕渣漿泵可選用AH型泵；當液面高度變化較大又需侵入液下工作時，應選用SP（SPR）,KZJL型泵。當需要高揚程輸送時。選用ZGB型,KZJ型或HH型泵。渣漿泵的合理選型是提高泵的使用壽命的關鍵因素之一。渣漿泵的合理選型包括合理選擇泵型。
SP Liquid slurry pump pump body, impeller guard plate are made of wear-resistant materials. The pump end of the bearing body adopts a double row tapered roller bearing, and the driving end adopts a single row cylindrical roller bearing, which can withstand the maximum axial load of the pump. The bearing body is fitted with a motor seat or motor bracket, which can be driven by a direct or triangle belt drive. The pump should be immersed in the slurry pool to work, the pump body suction inlet with a filter, can prevent large particles into the human pump. Jdhuiquan7.18
Four, the depth of the liquid can be extended pump self-belt liquid depth of about 70cm, according to customer requirements to increase the depth of the liquid, (the price with the addition of a long number of meters and different) please customers and customer service personnel in advance to explain.
水下抽沙泵@棗莊水下抽沙泵@水下抽沙泵吸不上水
實力和產質量量取得業界的認可。歡迎各界朋友蒞臨觀賞，輔導和事務洽談。LXL.ZBJ.ZC.ZE型紙漿泵AFB型耐腐離心泵，AY型油泵，YW，PW污水泵，NL，PNPNL泥漿泵，AH，HH，ZGM，ZGP(P)型系列渣漿泵，SP，SPR型液下泵。多級泵，壓濾機入料泵，清水泵，化工泵等產品專業出產加工的公司，具有完好，科學的質量辦理體系。我公司出產的泵首要有：IS，IH型清水泵，GC.D.DG.GDL.LG型多級泵，河北會泉泵業有限公司是渣漿泵SH雙吸泵HW混流泵，泵等產品。河北會泉泵業有限公司的誠信，實力和產質量量取得業界的認可。歡迎各界朋友蒞臨觀賞，輔導和事務洽談。不銹鋼離心泵，離心泵，螺桿泵。
