GJQ－105 電離式火焰監測器主要用于燃氣工業燃燒器的火焰監測。檢測性能可靠，可
以排除積炭、布線分布電容的影響，只對火焰敏感，對高溫無反應，具有強抗干擾性能。
················································································································
一、功能：
控制點火裝置自動點火，點火時自動打開燃料閥，在設定時間內沒有點燃，控制器自動關閉
燃料閥并報警，如點火成功則保持燃料正常供應。
·····················································································································
二、主要技術指標
1.電源電壓 220V ±10% 50/60HZ
2.火焰檢測 電離電極
3.檢測響應時間≤0.2 秒
4.電極使用溫度 長期 1300℃
5.探頭與監測器連接距離 ≤100 米
···························································································································
三、殼體 ABS 工程塑料
1.體積 155×90×55mm、不包括插頭尺寸
2.安裝尺寸 135×52mm 安裝孔Φ4－Φ5 mm
···························································································································
四、檢測電極 pyromax 高溫合金
1.直徑Φ12 伸入火區Φ4
2.安裝螺紋 M14×1.25
3.安裝檢測電極必須能接觸到火焰，檢測孔Φ12.5mm，電極長期工作溫度 1300℃，不需冷卻。
