DP3001-4,C3C,D4詳細介紹
DP3001-4,C3C,D4
4-1／2數字直流電壓表，1 / 8 DIN
DP3001
1年保修 CE
DC Voltmeter, 1/8 DIN
DP3001:4-1/2 Digit DC Voltmeter, 1/8 DIN
DP3001-5
±19,999 Count Display Span
±2 V to ±200 Vdc Ranges
True-Differential Input
120 dB CMR, 56 dB NMR
1 pA Typical Bias Current
3-Wire Ratio Measurement
Bright, 14 mm (0.56") LED Display
Automatic Zero and Polarity
Display Hold and Test
115/230 Vac Power
Short 104 mm (4.1") Deep 1/8 DIN Case
Options
Isolated 9 to 32 Vdc Power
Isolated 26 to 56 Vdc Power
Screw-Terminal Barrier Strip
NEMA 4 (IP65) Splash-Proof Lens Cover
The DP3001 is a low-cost, true-differential 4-1/2 digit panel meter for applications that require high resolution and high accuracy DC measurement. It fits a standard 1/8 DIN panel cutout and requires a depth of less than 104 mm (4.1") behind the panel. Display span is ±19,999 counts. Accuracy is 99.98%.
INPUT RANGES
The DP3001 offers DC voltage ranges of ±1.9999, ±19.999 and ±199.99 Vdc. By using an external DC voltage reference, any of these ranges can be configured for 3-wire ratio measurement.
OPTIONS
The meter can be electrically configured for three b voltage ranges, four decimal-point bs, high-impedance 3-wire ratio b. Mechanical options include a screw-terminal barrier strip for signal and power and a splash-proof lens cover which meets NEMA 4 (IP65) requirements.
SPECIFICATIONS
Noise Rejection
NMR, SIG HI to SIG LO: 56 dB, 50/60 Hz
CMR, SIG LO to ANA GND: 86 dB, DC to 60 Hz
CMR, AC GND to ANA GND: 120 dB, DC to 60 Hz
CMV, SIG LO to ANA GND: ±1 Vp
CMV, AC GND to ANA GND: 1500 Vp per HV test, 354 Vp per IEC spacing
3-Wire Ratio Reference
Analog Input Range: ±2, ±20, ±200 V
External Reference Input: +0.5 to +2.0 V
Load on Reference, Std: 6 kΩ
Load on Reference, Opt: 100 MΩ
Accuracy: 99.98%
Analog Input
Configuration: Differential, bipolar
Zero: Automatic
Span Adjustment: ±5%
Analog-to-Digital Conversion
Technique: Dual-slope, average-value
Polarity: Automatic
Signal Integration Period: 100 ms
Read Rate: 2.5/s
Accuracy at 25°C
Maximum Error: ±0.01% of reading ±2 counts
Span Tempco: ±0.01% of reading/°C
Step Response: 1s
Warmup to Rated Accuracy: 10 min
Display
Type: 7-segment, red LED
Height: 14 mm (0.56")
Symbols: -1.8.8.8.8
Decimal Points: Four bs selectable by jumpers from front panel or at connector, 10 mA sink
Overrange Indication: Four least-significant digits flash
Digital Inputs
HOLD and TEST Inputs: TTL or 5 V CMOS compatible
Blanking Input: Open-collector compatible
Power
AC Voltages: 115 or 230 Vac ±15%
AC Frequency: 49 to 440 Hz
DC Voltages: 9 to 32 Vdc, isolated to 300 Vp; 26 to 56 Vdc, isolated to 300 Vp
Power Consumption: 2.5 W
Output Voltages: 4.7 Vdc and -4.6 Vdc ±5%,10 mA max
Environmental
Operating Temperature: 0 to 60°C
Storage Temperature: -40 to 85°C
Relative Humidity: 95% at 40°C (non-condensing)
Mechanical
Bezel: 96 W x 48 H x 5.1 mm D (3.78 x 1.89 x 0.20")
Depth Behind Bezel: 104 mm (4.1")
Panel Cutout: 92 W x 45 mm H (3.62 x 1.77")
Weight: 14 oz (400 g)
Case Material: 94V-0 UL-rated polycarbonate
產品型號說明
(1) (2) (3) (4) (5) (6) (7)
選項描述
(1) Model
選擇
DP3001 代表 4-1/2 digit DC voltmeter
(2) Input Range
選擇
-3 代表 ±1.9999 Vdc
-4 代表 ±19.999 Vdc
-5 代表 ±199.99 Vdc
(3) 3-Wire Ratio Input Impedance (DC b)
選擇
Nothing(leave field blank) 代表 Standard
-HZ 代表 High impedance (100 mOhm)
(4) Decimal Point
選擇
Nothing(leave field blank) 代表 Programmable at D1 connector
-DP1 代表 1.9999 internally-wired
-DP2 代表 19.999 internally-wired
-DP3 代表 199.99 internally-wired
-DP4 代表 1999.9 internally-wired
(5) Power options
選擇
Nothing(leave field blank) 代表 115 Vac 50/60 Hz power
-C1 代表 230 Vac 50/60 Hz
-C3C 代表 Isolated 9 to 32 Vdc
-C3E 代表 Isolated 26 to 56 Vdc
(6) Add-On Option
選擇
Nothing(leave field blank) 代表 red LED display
-G 代表 Green LED display
(7) Add-On Option
選擇
Nothing(leave field blank) 代表 no option
-D4 代表 Screw-terminal barrier strip for power and signal (removes power and signal from D1) DP301AN only. D4 option required for CE
DP3001-4,C3C,D4
DP3001-4,C3C,D4 相關產品
DP3001-4,C3C,D4 技術文章
