|
|
Category
類 別 |
Trade-
Mark
牌 號 |
Equivalent to China Standard
相當國標 |
Characteristics & application
特性和用途 |
Equivalent to AWS
相當AWS |
|
Hard-surfacing
硬
面
堆
焊
|
D 667 |
EDZCr-B-15 |
HRc≥48. Resistance to wear, gas corrosion and oxidation. Hardfacing of blast furnace hopper and cracker part.
HRc≥48，耐磨、耐氣蝕、抗氧化。堆焊高爐料鐘、破碎機件 |
|
|
D 802 |
EDCoCr-A-03 |
HRc38-47. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as the edge of thermo-cutter.
HRc38-47，耐熱、耐蝕、耐磨。堆焊高溫工件如熱剪切刀刃 |
ECoCr-A |
|
D 812 |
EDCoCr-B-03 |
HRc45-50. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as internal-combustion engine valve.
HRc45-50，耐熱、耐蝕、耐磨。堆焊高溫工件如內燃機閥 |
ECoCr-B |
|
D 822 |
|
HRc≥53. Resistance to Wear and heat, bad shock resistance. Hardfacing of rotating blade wheel of boiler.
HRc≥53，耐熱、耐磨，但抗沖擊性差。堆焊鍋爐旋轉葉輪 |
|
|
D 832 |
EDCoCr-C-03 |
HRc≥50. Wear and heat resistance. Hardfacing of high temperature part such as hot-rolling guided way.
HRc≥50，耐熱、耐磨。堆焊高溫工件如熱軋導軌 |
ECoCr-C |
|
D 842 |
EDCoCr-D-03 |
HRc28-38. Corrosion and thermo-fatigue resistance, work harding. Hardfacing of hot forging die.
HRc28-38，耐蝕、抗熱疲勞，具有加工硬化性。堆焊熱鍛模 |
|
|
Cast iron
鑄
鐵 |
Z 308 |
EZNi |
Pure nickel, excellent general properties. Used to weld thin cast iron part and repair welding machined surface, such as guided way of machine tool.
純鎳，綜合性能好。鑄鐵薄件及加工面補焊用，如機床導衛 |
ENi-Cl |
|
Z 408 |
EZNiFe |
Iron nickel, high strength and excellent ductility. Repair welding of important gray cast iron and nodular cast iron, such as cylinder cap.
鎳鐵，強度高、塑性好。重要灰鑄鐵及球鐵焊補用，如汽缸蓋 |
ENiFe-Cl |
|
Z 508 |
EZNiCu-1 |
Copper nickel, good machinability and bad crack resistance. Repair welding of sand hole and gray cast iron machined surface subject to no load.
鎳銅，易加工，但抗裂性較差。不受力的灰鑄鐵加工面及砂眼補焊 |
ENiCu-B |
|
Copper alloys
銅
合
金 |
Cu 107 |
ECu |
Red copper, atmosphere and sea water corrosion and excellent electric conductivity. Welding of red copper such as electrical copper row.
紫銅，耐大氣，海水腐蝕，導電性好。紫銅焊接用，如導電銅排 |
ECu |
|
Cu 207 |
ECuSi |
Silicon bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.
硅青銅，耐蝕、強度高。銅、硅青銅及黃銅焊接用 |
ECuSi |
|
Cu 227 |
ECuSnB |
Tin phosphor bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.
錫磷青銅，耐蝕、強度高。銅、硅青銅及黃銅焊接用 |
ECuSn-C |
|
Cu 237 |
ECuAl |
Aluminum bronze, wear and corrosion and high strength. Welding or surfacing of copper alloys.
鋁青銅，耐磨、耐蝕，強度高。銅合金焊接或堆焊用 |
ECuAl-A2 |
|
Aluminum alloys
鋁
合
金 |
Al 109 |
TAl |
Pure aluminum, excellent corrosion resistance and middle strength. Welding of pure aluminum.
純鋁，耐蝕性好，但強度不高，純鋁焊接用 |
E1100 |
|
Al 209 |
TAlSi |
Silicon aluminum, good crack resistance and wide range of usage. Welding of aluminum alloys other than aluminum magnesium alloys.
鋁硅，抗裂性好，通用性大。鋁合金焊接用，不宜焊接鋁鎂合金 |
E4043 |
|
Al 309 |
TAMn |
Manganese aluminum, corrosion resistance and high strength. Welding of aluminum alloys.
鋁錳，強度高，耐蝕。鋁合金焊接用 |
E3003 |
|
Nickel alloys
鎳合金 |
Ni 102 |
ENi-1 |
Pure nickel. Welding and surfacing of nickel and nickel to steel.
純鎳，用于鎳、鎳與鋼的焊接與堆焊 |
ENi-1 |
|
Ni 207 |
ENiCu-7 |
Copper nickel. Welding and surfacing of copper nickel and copper nickel to steel.
鎳銅，用于鎳銅、鎳銅與鋼的焊接與堆焊 |
ENiCu-7 |
焊絲
|
Category
類 別 |
Trade
mark
牌 號 |
Chemical comb
主要成份(%) |
Characteristics & application
特性和用途 |
Equivalent to AWS
相當AWS |
|
Hardfacing
硬
面
堆
焊 |
S 101 |
C3 Cr28 Ni4
Si3.5 Fe Rem. |
HRc48-54. Resistance to wear, gas corrosion and oxidation. Hardfacing of bucket tooth and case pump.
HRc48-54，耐磨、耐氣蝕、抗氧化。堆焊鏟斗齒，泵套 |
|
|
S 111 |
C1 Cr29 W5
Co Rem. |
HRc38-47. Resistance to wear and corrosion at high-temperature. Hardfacing of high temperature and pressure valve.
HRc38-47，高溫下耐磨、耐蝕。堆焊高溫高壓閥門 |
ECoCr-A |
|
S 112 |
C1.5 Cr29 W8
Co Rem. |
HRc45-50. Resistance to wear and corrosion at high-temperature. Hardfacing of valve and hot-rolling pass.
HRc45-50，高溫下耐磨、耐蝕。堆焊閥門，熱軋孔型 |
ECoCr-B |
|
S 113 |
C2.5 Cr30 W17
Co Rem. |
HRc≥55. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of screw charging carriage.
HRc≥55，高溫下耐磨、耐熱，但抗沖擊性差。堆焊螺旋送料機用 |
|
|
S 114 |
C2.5 Cr30 W12
Co Rem. |
HRc≥53. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of three-cone bit.
HRc≥53，高溫下耐磨、耐熱，但抗沖擊較差。堆焊牙輪鉆頭 |
ECoCr-C |
|
Copper
alloys
銅
合
金 |
S 201 |
Sn1 Si0.3Mn0.3
Cu Rem. |
Good mechanical properties and crack resistance. Gas welding and argon arc welding of red copper.
機械性能好，抗裂性好。紫銅氣焊及氬弧焊用 |
ERCu |
|
S 211 |
Si3 Mn1
Cu Rem. |
Good mechanical properties. Argon arc welding of copper alloys and MIG brazing of steel.
機械性能好，銅合金氬弧焊及鋼的MIG釬焊用 |
ERCuSi-Al |
|
S 212 |
Sn5 Cu Rem. |
Wear resistance. Argon arc welding of copper alloys and surfacing of steel.
耐磨性好。銅合金氬弧焊及鋼的堆焊用 |
ERCuSn-A |
|
S 213 |
Sn8 Cu Rem. |
Wear resistance. Argon arc welding of copper alloys and surfacing of steel.
耐磨性好。銅合金氬弧焊及鋼的堆焊用 |
ERCuSn-C |
|
S 214 |
Al7.5 Cu Rem. |
Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.
耐磨、耐蝕。銅合金氬弧焊及鋼的堆焊用 |
ERCuAl-A1 |
|
S 215 |
Al9 Cu Rem. |
Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.
耐磨、耐蝕。銅合金氬弧焊及鋼的堆焊用 |
ERCuAl-A2 |
|
S 221 |
Cu60 Sn1 Si0.3
Zn Rem. |
Melting point is about 890℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
熔點約890℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵 |
|
|
S 221F |
Cu60 Sn1 Si 0.3
Zn Rem. |
S221 welding rod coated with flux.
外涂焊劑的S221焊絲 |
|
|
S 222 |
Cu58Sn0.9Si0.1
Fe0.8 Zn Rem. |
Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
熔點約880℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵 |
RBCuZn-C |
|
S 222F |
Cu58Sn0.9Si0.1
Fe0.8 Zn Rem. |
S222 welding rod coated with flux.
外涂焊劑的S222焊絲 |
RBCuZn-C |
|
S 223 |
Cu59 Sn0.6
Zn Rem. |
Melting point is about 900℃. Braze welding of copper, steel and cast iron.
熔點約900℃。銅、鋼、鑄鐵釬焊用 |
RBCuZn-A |
|
S 224 |
Cu62 Si0.5
Zn Rem. |
Melting point is about 905℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
熔點約905℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵 |
|
|
Copper
alloys
銅
合
金 |
S 225 |
Cu48 Ni10
Zn Rem. |
Melting point is about 935℃ and high strength. Braze welding of steel, nickel and carbide alloys.
熔點約935℃。高強度,釬焊鋼、鎳及硬質合金用 |
RBCuZn-D |
|
S 225F |
Cu48 Ni10
Zn Rem. |
S225 welding rod coated with flux.
外涂焊劑的S225焊絲 |
RBCuZn-D |
|
S 226 |
Cu60 Sn0.3
Si0.2 Zn Rem. |
Melting point is about 900℃. Gas welding of brass, also braze welding of copper, steel and cast iron.
熔點約900℃。黃銅氣焊用，也可釬焊銅、鋼、鑄鐵 |
|
|
S 227 |
Cu58Sn0.9Ni0.5
Si0.1 Fe0.8
Zn Rem. |
Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
熔點880℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵 |
RBCuZn-B |
|
S 229 |
Cu55 Ni6 Mn4
Zn余 |
Melting point is about 920℃, high strength. Braze welding of steel, nickel and hard carbide.
熔點約920℃。高強度,釬焊鋼、鎳及硬質合金用 |
|
|
Aluminum alloys
鋁
合
金 |
S 301 |
Al≥99.5 |
Good ductility and corrosion resistance. Gas welding and argon arc welding of pure aluminum.
塑性好、耐蝕。純鋁氣焊、氬弧焊用 |
ER1100 |
|
S 311 |
Si5 Al Rem. |
Corrosion resistance, wide range of usage. Gas welding and argon arc welding of aluminum alloys other than high magnesium alloys.
抗裂性好，通用性大。鋁合金氣焊、氬弧焊用。不宜用高鎂合金 |
ER4043 |
|
S 321 |
Mn1.3 Al Rem. |
Good corrosion resistance, weldability and ductility. Gas welding and argon arc welding of aluminum alloys.
良好的耐蝕性、可焊性及塑性。鋁合金氣焊、氬弧焊用 |
|
|
S 331 |
Mg5 Mn0.4
Al Rem. |
Corrosion resistance and high strength. Argon arc welding of aluminum alloys.
耐蝕，強度高。鋁合金氬弧焊用 |
ER5183 | <
釬焊料
|
Category
類 別 |
Trade-mark
牌號 |
Specification
規 格 |
Melting
Point
熔點(℃) |
Chemical
comb
主要成份(%) |
Application
用 途
|
Equivalent
to AWS
相當AWS |
|
Copper
zinc
銅鋅 |
L103 |
Wire & rod
絲 |
885-888 |
Cu54 Zn Rem. |
Brazing of copper, bronze and steel, subjected to low load.
釬焊銅、青銅和鋼等受力不大工件 |
|
|
L104 |
Foil
箔 |
890-930 |
Cu57 Mn2
Co2 Zn Rem. |
Brazing of carbide cutting tool.
釬焊硬質合金刀具 |
|
|
Copper
phosphorus
銅磷 |
L201 |
Cast rod, wire & rod, powder
鑄條、絲、粉 |
710-800 |
P7 Cu Rem. |
Brazing of copper and copper alloys.
釬焊銅及銅合金 |
BCuP-2 |
|
L204 |
Cast rod, wire
鑄條、絲 |
640-815 |
P5 Ag15
Cu Rem. |
Brazing of copper, copper alloys, silver and molybdenum etc.
釬焊銅及銅合金、銀、鉬等金屬。 |
BCuP-5 |
|
L205 |
Cast rod, wire & rod, powder
鑄條、絲、箔 |
640-800 |
P6 Ag5
Cu Rem. |
Brazing of copper and copper alloys.
釬焊銅及銅合金 |
BCuP-3 |
|
L207 |
Cast rod, wire & rod
鑄條、絲 |
640-770 |
P7 Ag5
Cu Rem. |
Brazing of copper and copper alloys.
釬焊銅及銅合金 |
BCuP-7 |
|
L209 |
Cast rod, wire
鑄條、絲 |
684-710 |
P7 Ag2
Cu Rem. |
Brazing of copper and copper alloys.
釬焊銅及銅合金。 |
BCuP-6 |
|
Silver
base
銀基 |
L302 |
Wire & rod
絲 |
745-775 |
Ag25 Cu40
Zn Rem. |
Brazing of copper, copper alloys, steel and stainless steel etc.
釬焊銅及銅合金、鋼及不銹鋼等 |
|
|
L303 |
Wire & rod
絲 |
660-725 |
Ag45 Cu30
Zn余 |
Brazing of copper, copper alloys, steel and stainless steel etc.
釬焊銅及銅合金、鋼及不銹鋼等 |
BAg-5 |
|
L303F |
Flux coated rod
涂藥絲 |
660-725 |
Ag45 Cu30
Zn Rem. |
L303 coated with flux, the same application as L303.
外涂釬劑的L303，用途與L303相同 |
BAg-5 |
|
L304 |
Foil
箔 |
690-775 |
Ag50 Cu34
Zn Rem. |
Brazing of copper, copper alloys and steel etc.
釬焊銅及銅合金、鋼等 |
BAg-6 |
|
L308 |
Wire & rod
絲 |
779-780 |
Ag72 Cu Rem. |
Brazing of copper and nickel under vacuum or reducing protective atmosphere.
銅和鎳的真空或還原保護氣氛釬焊 |
BAg-8 |
|
L312 |
Wire & rod
絲 |
595-605 |
Ag40.Cu.Zn.Cd |
Brazing of copper, copper alloys, steel and stainless steel etc.
釬焊銅及銅合金、鋼及不銹鋼等 |
|
|
L313 |
Wire & rod
絲 |
625-635 |
Ag50.Cu.Zn.Cd |
Brazing of copper, copper alloys, steel and stainless steel etc.
釬焊銅及銅合金、鋼及不銹鋼等 |
BAg-1a |
|
L321 |
Wire & rod
絲 |
615-650 |
Ag56.Cu.Zn.Sn |
Brazing of copper, copper alloys, steel and stainless steel etc.
釬焊銅及銅合金、鋼及不銹鋼等 |
BAg-7 |
|
L323 |
Wire & rod
絲 |
665-755 |
Ag30.Cu.Zn.Sn |
Brazing of copper, copper alloys, steel and stainless steel etc.
釬焊銅及銅合金、鋼及不銹鋼等 |
|
|
L325 |
Wire & rod
絲 |
645-685 |
Ag45.Cu.Zn.Sn |
Brazing of copper, copper alloys, steel and stainless steel etc.
釬焊銅及銅合金、鋼及不銹鋼等 |
BAg-36 |
|
L326 |
Wire & rod
絲 |
650-720 |
Ag38.Cu.Zn.Sn |
Brazing of copper, copper alloys, steel and stainless steel etc.
釬焊銅及銅合金、鋼及不銹鋼等 |
BAg-34 |
|
Aluminum base
鋁基 |
L400 |
Cast rod, wire & rod
鑄條、絲 |
577-582 |
Si11.5
Al Rem. |
Brazing of aluminum and aluminum alloys.
鋁及鋁合金的釬焊 |
BAlSi-4 |
|
L401 |
Cast rod
鑄條 |
525-535 |
Si5 Cu28
Al Rem. |
Brazing of aluminum and aluminum alloys.
鋁及鋁合金的釬焊 |
|
|
Tin lead
錫鉛 |
L600 |
Wire & rod
絲 |
183-185 |
Sn60 Sb≤0.8
Pb Rem. |
Soldering of fusible bls and heat-treated part.
易熔金屬及熱處理件的釬焊 |
60Sn |
|
L601 |
Wire & rod
絲 |
183-227 |
Sn18 Sb2
Pb Rem. |
Soldering of copper, copper alloys and galvanized iron plain sheet.
銅及銅合金、鍍鋅鐵皮的釬焊。 |
18Sn |
|
L602 |
Wire & rod
絲 |
183-256 |
Sn30 Sb2
Pb Rem. |
Soldering of copper, brass, copper alloys and galvanized iron plain sheet.
銅、黃銅、鐵、鍍鋅鐵皮的釬焊 |
30Sn |
|
L603 |
Wire & rod
絲 |
183-235 |
Sn40 Sb2
Pb Rem. |
Soldering of copper, copper alloys, steel and zinc parts.
銅及銅合金、鋼、鋅制零件的釬焊 |
40Sn |
|
L604 |
Wire & rod
絲 |
183-222 |
Sn90 Sb≤0.15
Pb Rem. |
Soldering of copper and steel for food and medicine field.
食品、醫療所需銅、鋼等金屬的釬焊 |
90Sn |
|
L605 |
Wire & rod
絲 |
232-240 |
Ag5 Sn95 |
Soldering of copper and steel for electrical and food field.
電器、食品所需銅、鋼等金屬的釬焊 |
|
|
L608 |
Wire & rod
絲 |
295-305 |
Sn5.5 Ag2.5
Pb Rem. |
Soldering of copper, copper alloys, steel and stainless steel.
銅及銅合金、鋼及不銹鋼的釬焊 |
|
|
Nickel base
鎳基 |
L702 |
Powder
粉 |
970-1000 |
Cr7 B3 Si4
Ni Rem. |
Brazing of stainless steel under vacuum or protective atmosphere.
不銹鋼真空或保護氣氛釬焊 |
BNi-2 |
氣焊及釬焊熔劑
|
Category
類 別 |
Trade-mark
牌 號 |
Product name
名 稱 |
Characteristics & application
特性和用途 |
|
Gas
welding
氣焊 |
CJ301 |
Copper gas welding flux
銅氣焊熔劑 |
Melting point is about 650℃, flux for gas welding and brazing of copper and copper alloys.
熔點約650℃，銅及銅合金氣焊或釬焊的助熔劑 |
|
CJ401 |
Aluminum gas welding flux
鋁氣焊熔劑 |
Melting point is about 560℃, flux for gas welding of aluminum and aluminum alloys.
熔點約560℃，鋁及鋁合金氣焊的助熔劑 |
|
Silver
brazing
銀釬焊 |
QJ101 |
Silver brazing flux
銀釬焊熔劑 |
Brazing flux of copper, copper alloys, steel and stainless steel within 550-750℃.
在550-750℃范圍釬焊銅及銅合金、鋼及不銹鋼的助熔劑 |
|
QJ102 |
Silver brazing flux
銀釬焊熔劑 |
Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃.
在600-850℃范圍釬焊銅及銅合金、鋼及不銹鋼的助熔劑 |
|
QJ102A |
Silver brazing flux
銀釬焊熔劑 |
Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃. Non agglomeration.
在600-850℃范圍釬焊銅及銅合金、鋼及不銹鋼。不易結塊 |
|
QJ112 |
Silver brazing paste flux
膏狀銀釬焊熔劑 |
Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃.
在600-850℃范圍釬焊銅及銅合金、鋼及不銹鋼的助熔劑 |
|
QJ103 |
Silver brazing flux
銀釬焊熔劑 |
Brazing flux of copper, copper alloys, steel and stainless steel within 550-750℃.
在550-750℃范圍釬焊銅及銅合金、鋼及不銹鋼的助熔劑 |
|
Aluminum brazing
鋁釬焊 |
QJ201 |
Aluminum brazing flux
鋁釬焊熔劑 |
Brazing flux of aluminum and aluminum alloys within 450-620℃.
在450-620℃范圍釬焊鋁及鋁合金的助熔劑 |
|
QJ207 |
Aluminum brazing flux
鋁釬焊熔劑 |
Brazing flux of aluminum and aluminum alloys within 560-620℃.
在560-620℃范圍釬焊鋁及鋁合金的助熔劑 | | |
